A leader in quality, service & innovation since 1970
M. Carder Industries
Phone:636-343-8770 • Fax:636-343-8805 • Toll Free:1-888-814-0094

Conversion Adapters

Conversion Adapters

Over the next two years the EPA and most state environmental agencies will permit service stations to change from vapor recovery to standard fueling equipment. The canisters on the vehicles mow capture the vapor when fueling. M. Carder makes conversion adaptors for all three vapor recovery systems.

More Info

Transitional Conversion Adapter

Transitional Conversion Adapter

This adaptor allows the use of a standard 5-Star nozzle with the existing vapor recovery hose and other equipment. By using this adaptor a marketer can use his “Good” vapor equipment until it fails. This allows the marketer the opportunity to use the vapor hoses and breakaways that they have inventory rather than lose their investment. M. Carder makes a Transitional adaptor for all three vapor systems.

More Info

Flow Regulators

Flow Regulators

Pressure sensitive valve adjust to any pressure to meet the EPA's 10 GPM ruling.

More Info

Spout Assemblies

Spout Assemblies

Replacement spouts for all standard and diesel nozzles.

More Info

Maintenance Kit

Maintenance Kit

For automatic nozzles

More Info

Our Products: Nozzle Accessories

Select a product on the left for more information.

Transitional Conversion Adapter

MAde in the USA
Made In The USA

UL Listed
UL listed for use with gas 10% ethanol blend and diesel.

PEI Member

Download a spec sheet for the Mircro Flo-1000Download a spec sheet.
Transitional Conversion Adapter

Over the next two years the EPA and most state environmental agencies will permit service stations to change from vapor recovery to standard fueling equipment. The canisters on the vehicles now capture the vapor when fueling.

Transitional Conversion Adaptors
This adaptor allows the use of a standard 5-Star nozzle with the existing vapor recovery hose and other equipment. By using this adaptor a marketer can use his "Good" vapor equipment until it fails. This allows the marketer the opportunity to use the vapor hoses and breakaways that they have inventory rather than lose their investment.

M. Carder makes a Transitional adaptor for all three vapor systems.

AV34BT-Balance AV34VT-Vacuum Assist AV34VHT-Healy

All of the above adaptors are attached between the vapor hose and a standard 5-Star nozzle.

Conversion Adaptor Specifications   Construction Specifications
  AV34BT AV34VT AV34VHT
Inlet: Balance Vac. Healy
Outlet: 34" NPT 34" NPT 34" NPT
O-rings: Viton
Diameter: 2.5" 1.5" 1.5"
Length: 2.5" 2.5" 2.5"

 

 

Body: All are machined from solid aluminum bar stock.

For use with gas 10% ethanol blend and diesel.

Download a spec sheet for the Mircro Flo-1000Download a spec sheet.

The transitional adaptors is available as "Adaptor only" or as part of a kit.

Conversion Adapter Kit 3

Kit 3

This kit contains a transitional adaptor installed in a 5-Star nozzle. This is a "no sealant" needed installation. The adaptor with O-rings seals threads into the hose end.

HOME | PRODUCTS | CONTACT US
© M. Carder Industries · 1634 Manufacturers Drive, Fenton MO 63026 | Phone: 636-343-8770 or Toll-Free 1-888-814-0094